URSA | 36′ J Boats 2005

IJPE : 643.00 sq ft

I : 46.50 ft

J : 13.25 ft

P : 43.25 ft

E : 15.50 ft

Working Sail Area : 644.00 sq ft

Racing Sails

• 2017 North 3Di mainsail
• 2014 North 3DL mainsail
• 2016 North 3Di 105% jib
• 2015 North 3DL 105% jib
• 2024 Quantum spinnaker (blue)
• 2018 North spinnaker (white)
• 2012 Quantum spinnaker (red/white/blue)
• Code 0 with furler

Cruising Sails

• UK Sailmakers mainsail with Dutchman system with additional mainsail cover

• Yanmar 3YM30 diesel engine (29 HP)

• Yanmar SD20 saildrive

• Heat exchanger removed, cleaned, serviced, and reinstalled as well as overall engine serviced (2024)

• Saildrive serviced and inspected regularly

• No signs of water intrusion noted during 2025 saildrive inspection

• Saildrive zincs replaced annually

• Alternator belt replaced (2026)

• Total engine hours unknown due to replacement of the engine-hour meter. Approximately 1,300 hours since 2010. Engine has been professionally maintained and is in regular use.

• B&G Zeus³ 7″ GPS/Radar display at helm (2022)

• B&G Triton2 S/D/W Wired Wind Package with 2 Displays and B&G Vulcan 5″ on spray hood

• 2020 B&G radar

• Raymarine GPS/radar at navigation station

• Raymarine ST6001 autopilot

• AIS (receive and send)

• Icom VHF radio

• Tacktick – mast mounted

• Removable speed wheel with blanking plug

• 12V DC electrical system

• 120V AC shore power

• Three Odyssey ODX-AGM31M AGM batteries (2024)

• Victron BMV-712 battery monitor (2024)

• New Balmar MC-618 regulator and Balmar SG-200 battery monitoring system installed (2023)

• Xantrex PROwatt SW 1000 Power Inverter (2020)

• Upgraded alternator

• New battery charger (2026)

• New SmartPlug shore power cord (2026)

• Custom Fairclough winter cover

• Dodger

• Removable dock box

• Tides Marine SailTrack system

• Wheel and mainsail cover 

• Anchor roller

• EPIRB

• LifeSling and horseshoe buoy

• Fenders and dock line

Rigging / Deck

• S1 and S2 spreader bars upgraded, and rod rigging components serviced by Newport Rigging Group (2025)

• Standing rigging replaced (2011)

• 2019 epoxy isolation of all deck hardware penetrations including chainplates and stanchion bases (pictures can be provided)

• New lifelines (2024)

• New sheaves in mast replaced (2024)

• New sheaves in boom replaced (2020)

Running Rigging

• New spinnaker halyard (2026)

• New main halyard (2023)

• New jib halyard and jib sheets (2022)

Hull / Steering

• No known wet-core issues

• 2024 upper and lower rudder bearings replaced

• 2024 bottom professionally stripped/prepped and converted to SeaHawk BioCop TF

• 2026 fresh bottom paint (2 coats

• Bilge system serviced with new Rule 1100 GPH bilge pump and Ultra Safety float switch (2019)

• Two new Plastimo 39-gallon flexible water tanks (2020)

• Head hoses and joker valve replaced (2022)

Two new Amerex fire extinguishers (2023)